Field Notes · Step 02 · Geometry
From a walkthrough scan to an energy model
A 360° walkthrough became a measured floor plan, and the floor plan became the geometry of the energy model.
An energy model is only as good as the building it describes. Drawings are often missing, outdated or wrong about what was built. So for the proof of concept, the geometry started with the building itself.
Scan
The building was captured in a single walkthrough with a 360° camera. The result is a measured 3D record of every room, wall and opening, the kind of record that also answers questions later, long after the site visit is over.
Floor plan
From the scan, a true top-down floor plan was cut and checked against independently measured dimensions. That plan links the real building to the model. It is accurate enough to trust and simple enough to work with.
Energy model geometry
Thermal zones were drawn on the floor plan. The default is core and perimeter zones by orientation, with separate zones wherever a space has its own system, schedule or load. The zoned plan was turned into model geometry, checked for area, closure and stacking, and brought into OpenStudio. The proof-of-concept model has nine conditioned zones.
The model isn’t calibrated yet. That comes once the utility history and the metered data are lined up against it, and it will be the subject of a later note.
Lessons learned
- A detailed BIM model isn’t required. Energy models need clean, simplified geometry, and construction detail adds little. Going from scan to floor plan to model was faster and kept what the simulation needs.
- Scanning is optional. It earns its place when drawings are missing or unreliable, or when the scan will serve other purposes. Good drawings and a site walk can be enough.
- The scan pays off on install day too. It showed where equipment and access really were before anyone climbed a ladder.